GENERAL DESCRIPTION
INDUSTRIAL-COMMERCIAL AQUA-STOP Series CP-224


   

Introducing the new Multi Zone Supervision Control Panel which combines the water detection with the interruption of the water supply.

The AQUA-STOP® system consists of water detectors ( Flexible or solid) installed in sensitive and critical areas and connected to the Multi Zone Control Panel. A microprocessor supervises the detection circuit and identifies the problems and their locations on the LCD screen located on the front of the panel. The combination of detection and interruption offers the best solution to your water detection needs.

Different sources of water could be the cause of a leak: It could be a broken pipe, intrusion from outside, tanks, air conditioning plants, any appliances linked to water, toilets etc. To maximize the protection offered by the system, all locations having a risk of flood , no matter the cause, or having the possibility to be reached by water , have to be monitored by a water detector.

At the time of a detection, the detector being in contact with water sends a signal to the panel. Instantly, a local alarm is sounded and the panel displays the information regarding the zone having the detection. Furthermore, one of the three contacts relays included, allows a telephone-dialer to reach up to 4 different numbers.

Each zone is continually monitored for either a leak or wiring fault and each alarm is displayed separately. The system can handle and report any number of simultaneous and /or consecutive alarms.

A group of detectors ( up to 30) can be connected on the same zone and an alarm event in this zone has no effect on the normal function and monitoring of adjacent zones or the rest of the system.

Furthermore, the Multi zone Supervision Control Panel allows the monitoring of all alarm events on your computer. The enhanced AQUA-STOP® software included with the system describes all events such as a detection, a wiring fault, a communication failure, a closed valve, a bad valve wiring etc. In addition, the state of the art systems models CP-224-CC AND CP-224-CVC allow the monitoring and the control of an installation via your own Ethernet network or simply using the power of the Web. Even more, the systems offers the capability to shut off the water supply of one or many zones using the internet.This last feature is allowed if the installation is equipped with the AQUA-STOP® VALVES model 341-SV.

Definitely, AQUA-STOP® Multi Zone Supervision Control Panel will improve your safety and reliability factor and will provide you with a real peace of mind.

   
MULTIZONE SUPERVISION
CONTROL PANEL
     
   
  AQUA-STOP®, Model 341-SV        
                   

DETECTORS

 
DF1 (Flexible)         DS2 (Solid)
                       
   
Enhanced graphical interface
                   

Home  Industry  Residential  Literature  Warranty  Contact us!

Last updated: January 14, 2007

© 2007 GIVE Systems Inc. All rights reserved.   AQUA-STOP ® is a registered trademark owned by GIVE Systems Inc.